To check if the Fiery is being used, open a web browser and enter the IP address of the C50xx. If your C50xx has this fitted then you cannot use the Canon PS or UFR2 driver and need to use the imagePASS-B1 driver. There is an optional print controller known as an imagePASS-B1 (aka Fiery) available for the C50xx series. Reply if this is enabled and I can give you direction on how to configure.Ĥ. With the Dept ID Management enabled, if you print to the C50xx without entering a supporting ID/PIN, then you print job will vanish. If you have to enter an ID/PIN in order to make a copy, then Dept ID management is most likely enabled (although there are 3rd party apps that behave in a similar way so you should check with your IT). No queue name is needed, just the IP address and the C50xx driver in the Use menu.ģ.
For both the UFR2 and PS driver, you should use HP Jetdirect-Socket for the Protocol. If installed you will see an entry called PS.Ģ. To check if the PS kit is installed, press the Check Counter button on the C50xx and scroll down a page or two.
If the C50xx does not have the Postscript kit activated, then you will have to use the UFR2 driver. You mention downloading all the Mac drivers.
